Milling chuck
Features of TRX.
TR type milling chuck
This is a high quality chuck which has reliable patented structure with high speed rotation, high precision, high rigidity, and high gripping strength. You can refill inner/ outer coolant owing to distinctive slits on the chuck holes.
-
Features
・Thick structure
Thick structure realizes high rigidity.
・Distinctive slit
Distinctive slit realizes powerful enough gripping strength even with thick-wall.
・High deflection accuracy
TIR 15㎛ (4×D)
・Suitable for deep cutting
Thick structure is suitable for deep cutting.
・Suitable for high speed revolution
Well balanced structure is suitable for high speed revolution.
・Fastening completion signal
help make sure tool is fastened enough.
・Coolant through
Compatible with center through/ side through without attaching extra accessory.
-
TRX type milling chuck
This is a high quality chuck which has reliable patented structure with high speed rotation, high precision, high rigidity, and high gripping strength. You can refill inner/ outer coolant owing to distinctive slits on the chuck holes.
Notice
- The products on above table are used in combination with straight collets. Please order straight collets separately.
- A spanner is not supplied.
- Gripping strength decreases when the products are used in combination with straight collets.
- Adjust bolt is not supplied.
- Coolant bolt type/ wrench specification
TRX16~25->M2.0 x 3 / LRE0.9, TRX32~42->M2..5 x 3 / LRE1.3
- Products marked ※ are not compatible with certain machines since they can cause interference.
Collet holder
-
EXH type collet holder features.
EXH type collet holder
Slim, well balanced, and versatile collet chuck.
Compatible with center through/ side through
No need for special nuts or special seal.
Just change collets to make it center through or side through.
The holder can stand pressure of 7MPa.
Many function become available only by changing collets.
Many function become available only by changing variety of AR collets.
Easy and certain tool change
・XSP wrench help fastening nuts easily and certainly owing to its clutch which put force on the external face evenly. Also, you can easily change rotation direction with one push.
・Umbrella-shaped tool is also available with this collet since a standard nut can be replaced with a NA-F type nut.
-
EXH type collet
This type has slim and stable structure without wrench catcher and suitable for high speed revolution. This type approaches carefully and reduces interference. Also, tooling that has wider tip than the shank is available since a standard nut can be replaced with a nut with wrench catcher.
AR collet conforming to DIN6499 is available on this holder, and become compatible with several machining including drilling, milling, and tapping only by changing collets.
High pressure coolant is available in combination with AR-OH/ AROH-GB type coolant collet.
BT50-EXH□□-□□
CODE | Clamping Range | L1 | L2 (Adjusting) | C | Collet | Wrench | Adjust Bolt | |
Φd | Max.~Min. | Nut OD | w/o Hole | w/ Hole | ||||
BT50-EXH7-90 | 0.5~7 | 90 | – | 23 | AR11-D | XSP23 | ECH7-05 | ECH7OH-05 |
BT50-EXH7-120 | 120 | |||||||
BT50-EXH7-165 | 165 | |||||||
BT50-EXH10-90 | 0.5~10 | 90 | 30 | AR16-D | XSP30 | ECH10-05 | ECH10OH-05 | |
BT50-EXH10-120 | 120 | |||||||
BT50-EXH10-165 | 165 | |||||||
BT50-EXH13-90 | 0.5~13 | 90 | 35 | AR20-D | XSP35 | ECH13-05 | ECH13OH-05 | |
BT50-EXH13-120 | 120 | |||||||
BT50-EXH13-165 | 165 | |||||||
BT50-EXH16-90 | 0.5~16 | 90 | 42 | AR25-D | XSP42 | ECH16-05 | ECH16OH-05 | |
BT50-EXH16-120 | 120 | |||||||
BT50-EXH16-165 | 165 | |||||||
BT50-EXH20-90 | 2~20 | 90 | 50 | AR32-D | XSP50 | ECH20-05 | ECH20OH-05 | |
BT50-EXH20-120 | 120 | |||||||
BT50-EXH20-165 | 165 |
BT40-EXH□□-□□
CODE | Clamping Range | L1 | L2 (Adjusting) | C | Collet | Wrench | Adjust Bolt | |
Φd | Max.~Min. | Nut OD | w/o Hole | w/ Hole | ||||
BT40-EXH7-75 | 0.5~7 | 75 | – | 23 | AR11-D | XSP23 | ECH7-05 | ECH7OH-05 |
BT40-EXH7-105 | 105 | |||||||
BT40-EXH7-135 | 135 | |||||||
BT40-EXH10-75 | 0.5~10 | 75 | 30 | AR16-D | XSP30 | ECH10-05 | ECH10OH-05 | |
BT40-EXH10-105 | 105 | |||||||
BT40-EXH10-135 | 135 | |||||||
BT40-EXH13-75 | 0.5~13 | 75 | 35 | AR20-D | XSP35 | ECH13-05 | ECH13OH-05 | |
BT40-EXH13-105 | 105 | |||||||
BT40-EXH13-135 | 135 | |||||||
BT40-EXH16-75 | 0.5~16 | 75 | 42 | AR25-D | XSP42 | ECH16-05 | ECH16OH-05 | |
BT40-EXH16-105 | 105 | |||||||
BT40-EXH16-135 | 135 | |||||||
BT40-EXH20-75 | 2~20 | 75 | 50 | AR32-D | XSP50 | ECH20-05 | ECH20OH-05 | |
BT40-EXH20-105 | 105 | |||||||
BT40-EXH20-135 | 135 |
BT30-EXH□□-□□
CODE | Clamping Rang | L1 | L2 (Adjusting) | C | Collet | Wrench | Adjust Bolt | |
Φd | Max.~Min. | Nut OD | w/o Hole | w/ Hole | ||||
BT30-EXH7-60 | 0.5~7 | 60 | – | 23 | AR11-D | XSP23 | ECH7-05 | ECH7OH-05 |
BT30-EXH7-105 | 105 | |||||||
BT30-EXH10-60 | 0.5~10 | 60 | 30 | AR16-D | XSP30 | ECH10-05 | ECH10OH-05 | |
BT30-EXH10-120 | 120 | |||||||
BT30-EXH13-60 | 0.5~13 | 60 | 35 | AR20-D | XSP35 | ECH13-05 | ECH13OH-05 | |
BT30-EXH13-120 | 120 | |||||||
BT30-EXH16-75 | 0.5~16 | 75 | 42 | AR25-D | XSP42 | ECH16-05 | ECH16OH-05 | |
BT30-EXH16-105 | 105 |
Notice
1, This product is used in combination with a collet chuck.
2, A spanner is not supplied.
3, adjust bolt is not supplied.
Spenner
XSP type spanner
Code | ID | L | Applicable Holder Type |
XSP23 | 23 | 120 | EXH 7 |
XSP30 | 30 | 140 | EXH10 |
XSP35 | 35 | 154 | EXH13 |
XSP42 | 42 | 173 | EXH16 |
XSP50 | 50 | 180 | EXH20 |
FK type spanner
Code | L | Applicable Holder Type |
FK-3 | 136 | EXH 7 |
FK-4 | EXH10 | |
FK-5 | 160 | EXH13 |
FK-6 | 173 | EXH16 |
FK-7 | 196 | |
FK-8 | 208 | EXH20 |
Nut
NA-FX type nut
Code | D | L | Applicable Holder Type |
NA11FX | 23 | 20.5 | EXH 7 |
NA16FX | 30 | 26.5 | EXH10 |
NA20FX | 35 | 28.5 | EXH13 |
NA25FX | 42 | 30 | EXH16 |
NA32FX | 50 | 31 | EXH20 |
NA-F type nut
Code | D | L | Applicable Holder Type |
NA11F | 23 | 11 | EXH 7 |
NA16F | 30 | 15 | EXH10 |
NA20F | 35 | 17 | EXH13 |
NA25F | 42 | 18 | EXH16 |
NA32F | 50 | 19 | EXH20 |
-
ECH type collet holder
This type is a basic holder which is compatible with several machining including drilling, reaming, and synchro tapping. Center through/ side through system become available only by changing 16°tapered collet chuck.
Compatible with center through/ side through
No need for special nuts or special seal.
Just change collets to make it center through or side through.
The holder can stand pressure of 7MPa and help cooling edge down and removing chip from edge.
BT50-ECH□□-□□
CODE | Clamping Range | L | l (Adjusting) |
Nut OD | Collet | Wrench | Adjust Bolt | |
Φd | ΦD1 | w/o Hole | w/ Hole | |||||
BT50-ECH7-90 | 0.5~7 | 90 | 45~20 | 23 | AR11-D | FK-3 | ECH7-05 | ECH7OH-05 |
BT50-ECH7-135 | 135 | |||||||
BT50-ECH10-90 | 0.5~10 | 90 | 50~30 | 32 | AR16-D | FK-4 | ECH10-05 | ECH10OH-05 |
BT50-ECH10-120 | 120 | |||||||
BT50-ECH10-150 | 150 | 55~30 | ||||||
BT50-ECH13-90 | 0.5~13 | 90 | 55~35 | 36 | AR20-D | FK-5 | ECH13-05 | ECH13OH-05 |
BT50-ECH13-120 | 120 | |||||||
BT50-ECH16-90 | 0.5~16 | 90 | 55~40 | 43 | AR25-D | FK-6 | ECH16-05 | ECH16OH-05 |
BT50-ECH16-120 | 120 | |||||||
BT50-ECH16-150 | 160 | 65~40 | ||||||
BT50-ECH20-90 | 2~20 | 90 | 65~45 | 51 | AR32-D | FK-8 | ECH20-05 | ECH20OH-05 |
BT50-ECH20-120 | 120 | |||||||
BT50-ECH26-90 | 3~26 | 90 | 80~55 | 63 | AR40-D | FK-9 | ECH26-05 | ECH26OH-05 |
BT40-ECH□□-□□
CODE | Clamping Range | L | l (Adjusting) | Nut OD | Collet | Wrench | Adjust Bolt | |
Φd | ΦD1 | w/o Hole | w/ Hole | |||||
BT40-ECH7-75 | 0.5~7 | 75 | 45~20 | 23 | AR11-D | FK-3 | ECH7-05 | ECH7OH-05 |
BT40-ECH7-105 | 105 | |||||||
BT40-ECH10-75 | 0.5~10 | 75 | 50~30 | 32 | AR16-D | FK-4 | ECH10-05 | ECH10OH-05 |
BT40-ECH10-105 | 105 | |||||||
BT40-ECH10-135 | 135 | 55~30 | ||||||
BT40-ECH13-75 | 0.5~13 | 75 | 55~35 | 36 | AR20-D | FK-5 | ECH13-05 | ECH13OH-05 |
BT40-ECH13-105 | 105 | |||||||
BT40-ECH16-75 | 0.5~16 | 75 | 55~40 | 43 | AR25-D | FK-6 | ECH16-05 | ECH16OH-05 |
BT40-ECH16-105 | 105 | |||||||
BT40-ECH16-135 | 135 | 65~40 | ||||||
BT40-ECH20-75 | 2~20 | 75 | 60~45 | 51 | AR32-D | FK-8 | ECH20-05 | ECH20OH-05 |
BT40-ECH20-105 | 105 | |||||||
BT40-ECH26-75 | 3~26 | 75 | 75~50 | 63 | AR40-D | FK-9 | ECH26-05 | ECH26OH-05 |
BT30-ECH□□-□□
CODE | Clamping Range | L | l (Adjusting) | Nut OD | Collet | Wrench | Adjust Bolt | |
Φd | ΦD1 | w/o Hole | w/ Hole | |||||
BT30-ECH7-60 | 0.5~7 | 60 | 45~20 | 23 | AR11-D | FK-3 | ECH7-05 | ECH7OH-05 |
BT30-ECH7-105 | 105 | |||||||
BT30-ECH10-60 | 0.5~10 | 60 | 50~30 | 32 | AR16-D | FK-4 | ECH10-05 | ECH10OH-05 |
BT30-ECH10-120 | 120 | |||||||
BT30-ECH13-60 | 0.5~13 | 60 | 55~35 | 36 | AR20-D | FK-5 | ECH13-05 | ECH13OH-05 |
BT30-ECH13-120 | 120 | |||||||
BT30-ECH16-60 | 0.5~16 | 60 | 55~40 | 43 | AR25-D | FK-6 | ECH16-05 | ECH16OH-05 |
BT30-ECH16-105 | 105 | |||||||
BT30-ECH20- 75 | 2.5~20 | 75 | 60~45 | 51 | AR32-D | FK-8 | ECH20-05 | ECH20OH-05 |
BT30-ECH20-105 | 105 |
Notice
1, This product is used in combination with a collet chuck.
2, A spanner is not supplied.
3, adjust bolt is not supplied.
4, Please replace a standard nut with a nut for high speed revolution (NA-R/ SR) when high speed revolution is required.
Please refer to “ALPS NICE MILL SERIES” catalog for more information.
-
SS. type collet holder
This holder becomes beneficial for tool interference by using in combination with milling chuck or collet holders. Versatile 16°tapered collet compatible with this type.
SS□□-ECH□□-□□
CODE | D1 | D2 | L | L1 | L2 | Max | Nut Dimensions | W | Collet | Wrench | |
L3 | C1 | L4 | |||||||||
SS8-ECH5S-35 | 0.3~5 | 8 | 35 | 49 | 14 | 36 | 14.5 | 10.8 | 6 | AR8-D1 | SP-13 |
SS12-ECH5S-80 | 12 | 80 | 96 | 16 | 10 | ||||||
SS16-ECH7-40 | 0.5~7 | 16 | 40 | 56 | 40 | 23 | 11.5 | 14 | AR11-D1 | FK-3 | |
SS16-ECH7-70 | 70 | 94 | 24 | 55 | 19 | ||||||
SS20-ECH7-45 | 20 | 45 | 61 | 16 | 45 | 17 | |||||
SS25-ECH10-70 | 0.5~10 | 25 | 70 | 105 | 35 | 70 | 32 | 17 | 27 | AR16-D1 | FK-4 |
SS25-ECH10-150 | 150 | 185 | 53 | ||||||||
SS25-ECH13-70 | 1~13 | 70 | 106 | 36 | 75 | 36 | 19 | AR20-D1 | FK-5 | ||
SS25-ECH16-70 | 1~16 | 110 | 40 | 80 | 43 | 20 | 36 | AR25-D1 | FK-6 | ||
SS32-ECH10-80 | 0.5~10 | 32 | 80 | 119 | 39 | 70 | 32 | 17 | 32 | AR16-D1 | FK-4 |
SS32-ECH13-80 | 1~13 | 116 | 36 | 75 | 36 | 19 | AR20-D1 | FK-5 | |||
SS32-ECH16-80 | 1~16 | 120 | 40 | 80 | 43 | 20 | 36 | AR25-D1 | FK-6 | ||
SS32-ECH20-80 | 2~20 | 128 | 48 | 100 | 51 | 23 | 46 | AR32-D1 | FK-8 | ||
SS40-ECH20-110 | 40 | 110 | 158 |
Notice
1, This product is used in combination with a collet chuck.
2, A spanner is not supplied.
3, Holders marked ☆ do not support coolant through.
Removing inner adjust bolt or replacement with adjust bolt for coolant through is essential to use coolant through. Please contact us for more information.
-
15T type collet holder
This is the collet holder for small MC and DC and is compatible with drilling, reaming, and synchro tapping. Versatile 16°tapered collet compatible with this type.
15T-ECH□□S-□□
Nut Dimensions | Collet | Wrench | Adjust Bolt | |||||||
Code | d | L | l | C1 | W | D1 | L3 | |||
15T-ECH7S-40 | 0.5~7 | 40 | 31 | 20 | 17 | 19 | 11.5 | AR11 | SP-17A | ECH7-05 |
15T-ECH7S-48 | 48 | |||||||||
15T-ECH7S-55 | 45 | |||||||||
15T-ECH7S-75 | 60 | 16 | 14 | |||||||
15T-ECH7S-90 | 45 | |||||||||
15T-ECH10S-55 | 0.5~10 | 60 | 42.5 | 28 | 22 | 28 | 17 | AR16 | SP-25 | ECH10-05 |
Notice
1, This product is used in combination with a collet chuck and pull-stud bolt.
2, A spanner is not supplied.
3, adjust bolt is not supplied.
-
S20T collet holder
This is the collet holder for small MC and DC and is compatible with drilling, reaming, and synchro tapping. Versatile 16°tapered collet compatible with this type.
S20T-ECH□□■-□□
Nut Dimensions | Collet | Wrench | Adjust Bolt | |||||||
Code | d | L | l | C1 | W | D1 | L3 | |||
S20T-ECH7S-40 | 0.5~7 | 40 | 35 | 19 | 17 | 19 | 11.5 | AR11 | SP-17A | ECH7-05 |
S20T-ECH7S-50 | 50 | |||||||||
S20T-ECH10S-45 | 0.5~10 | 45 | 40 | 22 | 19 | 28 | 17 | AR16 | SP-25 | ECH10-05 |
S20T-ECH10S-60 | 60 | |||||||||
S20T-ECH13S-45 | 0.5~13 | 45 | 41 | 25 | 22 | 34 | 19 | AR20 | SP-30 | ECH13-05 |
S20T-ECH13S-60 | 60 | |||||||||
S20T-ECH13M-45 | 45 | – | 28 | AE-20M |
Notice
1, This product is used in combination with a collet chuck and pull-stud bolt.
2, A spanner is not supplied.
3, adjust bolt is not supplied.
-
25T collet holder
This is the collet holder for small MC and DC and is compatible with drilling, reaming, and synchro tapping. Versatile 16°tapered collet compatible with this type.
25T-ECH□□■■-□□
Nut Dimensions | Collet | Wrench | Adjust Bolt | |||||||
Code | d | L | l | C1 | W | D1 | L3 | |||
25T-ECH5M-45 | 0.5~5 | 45 | – | 12 | – | 12 | 10.8 | AR8 | AE-8M | – |
25T-ECH7SR-60 | 0.5~7 | 60 | 35 | 19 | 19 | 11.5 | AR11 | SP-17A | ECH7-05 | |
25T-ECH7SR-70 | 70 | |||||||||
25T-ECH10SR-60 | 0.5~10 | 60 | 55 | 22 | 28 | 17 | AR16 | SP-25 | ECH10-05 | |
25T-ECH10SR-70 | 70 | |||||||||
25T-ECH13SR-60 | 0.5~13 | 60 | 25 | 34 | 19 | AR20 | SP-30 | ECH13-05 | ||
25T-ECT7S-60 | 0.5~7 | – | 23 | 19 | 11.5 | AR11 | SP-17A | – | ||
25T-ECT7S-70 | 70 |
Notice
1, This product is used in combination with a collet chuck and pull-stud bolt.
2, A spanner is not supplied.
3, adjust bolt is not supplied.
4, ETC type holder is used only for synchro tapping.
-
straight collet
This is a collet with adjust bolt used in combination with TR/ T type milling chuck.
This is suitable for gripping small diameter straight shank. Center through is not available when ASS□□-D1 is attached to TR/ R type.
ASS□□-□□ , AS□□-□□
CODE | FIG | d (mm) | D | L3 | L2 | L1 | D1 |
ASS20-D1 | 1 | 6, 8, 10, 12, 16 | 20 | 65 | 61 | 3 | 23.5 |
ASS25-D1 | 6, 8, 10, 12, 16, 20 | 25 | 67 | 63 | 28.5 | ||
ASS32-D1 | 6, 8, 10, 12, 16, 20, 25 | 32 | 75 | 70 | 37.0 | ||
ASS42-D1 | 6, 8, 10, 12, 16, 20 ,25, 32 | 42 | 83 | 78 | 47.0 | ||
AS20-D1 | 2 | 6, 8, 10, 12, 16 | 20 | – | 61 | 3 | 23.5 |
AS25-D1 | 6, 8, 10, 12, 16, 20 | 25 | 63 | 28.5 | |||
AS32-D1 | 6, 8, 10, 12, 16, 20 ,25 | 32 | 70 | 37.0 | |||
AS42-D1 | 6, 8, 10, 12, 16, 20 ,25, 32 | 42 | 78 | 47.0 |
Notice
Center through is not available when ASS□□-□□ is attached to a milling chuck.
-
AR collet
16°tapered collet conformable to DIN6499/ ISO15488
CODE | Φd | D | D1 | L | L1 | Holder | |
ID | Clamping Range | ||||||
AR8-d | 0.5~5 | 0.2~0.5 | 8 | 8.4 | 13.6 | 4.6 | ECH5S |
AR11-d | 1~7 | 0.5 | 11 | 11.5 | 18 | 5.5 | ECH7 |
AR16-d | 1~10 | 0.5~1.0 | 16 | 17 | 27 | 10 | ECH10 |
AR20-D | 1~13 (14) | 20 | 21 | 31 | 11 | ECH13 | |
AR25-d | 1~16 | 25 | 26 | 35 | 11.5 | ECH16 | |
AR32-d | 3~20 | 32 | 33 | 40 | 12.5 | ECH20 | |
AR40-d | 4~26 | 1 | 40 | 41 | 46 | 14.5 | ECH26 |
AR50-d | 6~34 | 1~2 | 50 | 52 | 50 | 22.5 | ECH34 |
Notice
1, The collet can grip tool whose diameter is smaller than that written on D1 column.
Example, In order to grip 6.7 mm drill, collet whose maximum grip range is 7 mm (AR11-7, AR16-7, and etc.) is suitable.
2, please specify which grade you need when ordering
Example, For S grade: AR32-5
For AA grade: AR32-5AA/
For AAA grade: AR32-5AAA
AA grade is available in every size except for AR8 series
AAA grade is made to order. (Available in AR11, 16, 20, 25, and 32)
3, The shape of AR8 is different from the drawing above.
4, The shape of inner diameter differs depend on φd
5, tool would not be installed to the end of the holder when you use AR20-14.
-
AR/ OH coolant collet
AR/OH coolant collet is a new liquid tight collet chuck which is able to seal high pressure coolant and has gripping range from 0.1mm to 0.5mm realized with special slits.
This collet can stand water pressure of 7MPa.
CODE | Φd | ΦD | ΦD1 | L | L1 | |
ID | Clamping Range | |||||
AR11OH-d | 2~7 | 0.1 | 11 | 11.5 | 18 | 6.5 |
AR16OH-d | 2~6 | 0.1 | 16 | 17 | 27 | 10 |
6~10 | 0.5 | |||||
AR20OH-d | 3~6 | 0.1 | 20 | 21 | 31 | 11 |
6~13 | 0.5 | |||||
AR25OH-d | 3~6 | 0.1 | 25 | 26 | 35 | 11.5 |
6~16 | 0.5 | |||||
AR32OH-d | 3~8 | 0.1 | 32 | 33 | 40 | 12.5 |
8~20 | 0.5 | |||||
AR40OH-d | 10~26 | 0.5 | 40 | 41 | 46 | 14.5 |
AR50OH-d | 16~34 | 0.5 | 50 | 52 | 60 | 22.5 |
Notice
1, Collets in size which is not shown in the above table is made to order.
2, It is compatible with oil hole (OH) type drill.
3, Please insert a drill to the end of collets.
4, Shape of nonstandard products differs from that of standard products.
5, There is a possibility of leaking coolant if you clamp a drill which is out of nominal diameter (-0.1 to 0.5mm) of each collets.
6, Sealing function does not work if you use flatted straight shank drill.
7, AR50OH is made to order.
Notice
Correct method for use
-
AR/GB tap collet
There is a square rotation stopper inside.
-
AR/GH coolant tap collet
AR/GH coolant collet is a new liquid tight collet chuck which is able to seal high pressure coolant and has gripping range from 0.1mm to 0.5mm realized with special slits.
This collet can stand water pressure of 7MPa.
There is a square rotation stopper inside.
-
AR/C coolant collet
AR/C coolant collet is a new liquid tight collet chuck which is able to seal high pressure coolant and has gripping range from 0.1mm to 0.5mm realized with special slits.